Bendix rotors are designed to meet OE specifications for fit, form and function to provide safe, consistent and reliable performance.
Features:
- OEM style vane configurations maximize heat dissipation which speeds up the cooling process, eliminating noise and increasing performance
- Designed to exacting OEM specifications and tested for balance, ensuring safe operation
- Edge coded with the proper discard thickness which identifies when the rotor has reached the end of it's useful life
BENDIX PRT6001 Specifications
Style: Full Cast
Type: Disc Only
Design: Vented
Studs: 5
Supplied Stud (IN): No
Outside Diameter (IN): 12.913
Nom Thk (IN): 1.102
Min Thk (IN): 0.984
Bolt Circle (IN): 4.5
Overall Height (IN): 1.937
Installation Tips:
- Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function.
12MONTHS/ 12,000MILES WARRANTY