Centric brake rotors provide exceptional quality and value.
Features & Benefits:
Non-Directional Finish
Machined non-friction surfaces
G11H18 metallurgy
Install It Yourself!
In the world of vehicle maintenance, replacing your Brake Rotors is an easy job to tackle on your own. A Repair Manual (found in the "Literature" Category) will provide step-by-step instructions and pictures for your specific vehicle to ensure the job is done right.
To ensure optimum brake performance and safety, it is strongly recommended that you also replace your brake pads when installing new rotors.
Installation Tips:
Always work on one side of the vehicle at a time. For front brakes, turn the steering wheel to the side you are working on to increase access to the caliper bolts
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Anti Seize Lubricant to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply Brake Lubricant to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the brake fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - WARNING: Cancer and Reproductive Harm - https://www.p65warnings.ca.gov/
Attention California Customers - WARNING: Cancer and Reproductive Harm - https://www.p65warnings.ca.gov/
CENTRIC Warranty Information:
90 days/3,000 miles